All Emeco stools are made by hand. Each stool is unique with subtle differences.

Brushed Finish
Anodizing changes the aluminum surface to aluminum oxide, a super-strong material.

Anodized aluminum is corrosion-proof and can be used outdoors, however we suggest cleaning with soap and water every two weeks to remove grit and other air pollutants that can pit the surface.

The Emeco stools are bleach cleanable. Hydrogen peroxide-based cleaners may also be used, dilution level 1:10.

Daily Cleaning:
To keep your chairs looking beautiful, clean with soap and water, and dry with a soft cloth. You can also use Windex®, Formula 409® or similar spray cleaner, with or without bleach followed by a lint free towel. Hydrogen peroxide-based cleaners may also be used, dilution level 1:10. Wash any film or residue with hot water. Do not use Stainless Steel cleaner on any aluminum furniture. For Heavy-duty dirt or oil use a very hot water and strong soap, followed by LIGHT scrubbing in the direction of the aluminum grain with a soft bristled brush or damp Scotchbrite® pad.

Scuffmarks:
Light scrubbing in the direction of the aluminum grain with a Scotchbrite® pad.

Stains:
Treat the stain with the appropriate cleaner (i.e. bleach for coffee, paint thinner for paint) leave the cleaner sit on the stain until the stain is dissolved, then follow the instructions for heavy duty dirt.

Polished Finish

It takes eight hours to hand polish each piece of Emeco furniture. Each item will exhibit slight variations of handcraft.

There is no coating on Emeco’s hand polished items and they will begin to patina immediately upon use. Polished aluminum is non-corrosive and does not tarnish. To keep your polished chairs shining brightly use an ordinary car wax. Do not use abrasive cleansers, pads or brushes on hand polished aluminum.

Daily cleaning:
Windex® or similar spray cleaner, with or without bleach followed by a soft, lint free towel. Wash any film or residue with hot water. Do not use Stainless Steel cleaner on any aluminum furniture.

Heavy-duty dirt or oil:
We recommend Emeco Clean & Shine, which can be ordered from customerservice@emeco.net. Alternatively, use very hot water and strong soap, followed by a soft, lint free towel.

Light scratches:
High quality aluminum polish with buffing pads in a circular pattern (available at most hardware stores). Follow by a light polish of cornstarch with a very soft cloth.

Glides:
Glides are the small "feet" at the bottom of each chair leg. Adding new glides - and making sure you have the right type of glides for your floor - can make the world of difference and breathe new life into your product. Learn more.